| 150kV快前沿低抖动Marx发生器研制 |
| |
| 引用本文： | 马成刚,李玺钦,李亚维,吴烈.150kV快前沿低抖动Marx发生器研制[J].强激光与粒子束,2015,27(4):045001-201. |
| |
| 作者姓名： | 马成刚 李玺钦 李亚维 吴烈 |
| |
| 作者单位： | 1.中国工程物理研究院 流体物理研究所, 脉冲功率科学与技术重点实验室, 四川 绵阳 621 900 |
| |
| 基金项目： | 中国工程物理研究院预先研究项目(426020201) |
| |
| 摘 要： | 研制了一种主要用于脉冲功率系统前级触发用的Marx发生器,介绍了其工作原理和主要参数。该Marx发生器采用单边充电技术路线和同轴紧凑型结构,高压脉冲采用柔性高压同轴电缆输出,在75Ω匹配负载上获得了超过170kV的高压脉冲输出,脉冲宽度超过200ns,在140~160kV工作区间内其前沿小于3ns,抖动不超过1.5ns。该Marx发生器工作范围宽,稳定可靠,很好地满足了高功率脉冲触发系统的要求。
|
| 关 键 词： | Marx发生器 快前沿 低抖动 触发 高功率脉冲系统 |
| 收稿时间： | 2014-07-16 |
Development of 150 kV fast risetime low jitter Marx generator |
| |
| Ma Chenggang;Li Xiqin;Li Yawei;Wu Lie.Development of 150 kV fast risetime low jitter Marx generator[J].High Power Laser and Particle Beams,2015,27(4):045001-201. |
| |
| Authors: | Ma Chenggang;Li Xiqin;Li Yawei;Wu Lie |
| |
| Affiliation: | 1.Key Laboratory of Pulsed Power,Institute of Fluid Physics,CAEP,P.O.Box 919-107,Mianyang 621900,China |
| |
| Abstract: | A Marx generator for triggering used in pulsed power system has been researched. The principle and main parameters are introduced. A Marx generator is designed based on single polarity charge and coaxial structure. The Marx generator meets the following design specifications on the 75 load matching with the coaxial cable: more than 170 kV output voltage, more than 200 ns pulse width, 3 ns risetime and less than 1.5 ns jitter from 140 kV to 160 kV. The Marx generator can work stably and reliably at large range voltage. The demand for triggering is satisfied commendably. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载全文 |
|
