| 一种100 kV Mini-Marx发生器触发源的设计 |
| |
| 引用本文： | 李玺钦,赵娟,吴红光,丁明军,马成刚.一种100 kV Mini-Marx发生器触发源的设计[J].强激光与粒子束,2014,26(8):085001. |
| |
| 作者姓名： | 李玺钦 赵娟 吴红光 丁明军 马成刚 |
| |
| 作者单位： | 1.中国工程物理研究院 流体物理研究所, 脉冲功率科学与技术重点实验室, 四川 绵阳 621 900 |
| |
| 基金项目： | 国家部委级基础科研项目 |
| |
| 摘 要： | 根据100kV Mini-Marx脉冲发生器对触发源的技术要求,设计了一种基于VE4141型氢闸流管气体开关器件的高压脉冲触发源。该触发源系统输出高压脉冲幅度达到0～30kV、脉冲前沿小于15ns、脉冲宽度大于500ns,不仅可以接收光、电和手动信号触发,而且还可以通过接口来控制调整100kV Mini-Marx发生器的充电电压以及电压显示。采用固态IGBT半导体开关器件产生预触发和主触发脉冲,控制气体开关氢闸流管VE4141瞬间导通放电输出高压脉冲信号,触发后级Mini-Marx脉冲发生器产生不小于100kV的高压脉冲。
|
| 关 键 词： | Mini-Marx发生器 氢闸流管 抖动 高压脉冲 触发源 |
| 收稿时间： | 2013/12/13 |
Design of a trigger for the 100 kV Mini-Marx generator |
| |
| Affiliation: | 1.Key Laboratory of Pulsed Power,Institute of Fluid Physics,CAEP,P.O.Box 919-107,Mianyang 621900,China |
| |
| Abstract: | A trigger is designed based on VE4141 thyratron for the 100 kV Mini-Marx generator. The trigger meets the following design specifications: pulse voltage is up to 30 kV, falling time is less than 15 ns, pulse width is more than 500 ns. It can receive optical signal, electric signal and manual signal to trigger. Charge voltage can be adjusted and displayed by the control plane. Pre-trigger and trigger signals are received through an IGBT drive circuit, and are used to control the VE4141 thyratron to discharge and get a high voltage pulsed signal to trigger the 100 kV Mini-Marx generator. |
| |
| Keywords: | Mini-Marx generator thyratron jitter high voltage pulse trigger |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载全文 |
|
