首页 | 官方网站   微博 | 高级检索  
     

驱动X光二极管的级联Blumlein型脉冲网络过电压脉冲分析
引用本文:马勋,邓建军,姜苹,刘宏伟,袁建强,王凌云,李洪涛.驱动X光二极管的级联Blumlein型脉冲网络过电压脉冲分析[J].强激光与粒子束,2014,26(4):045025.
作者姓名:马勋  邓建军  姜苹  刘宏伟  袁建强  王凌云  李洪涛
作者单位:1.中国工程物理研究院 流体物理研究所, 脉冲功率科学与技术重点实验室, 四川 绵阳 621 900
基金项目:国家自然科学基金青年基金项目(51207147); 中国工程物理研究院科学发展基金项目(2012B0402054,2013B0402061)
摘    要:为了提高装置容许的运行电压以提高辐射剂量产额,开展了放电过程中影响脉冲形成网络过电压幅值因素的研究。在引入开关导通不同步性和导通电阻条件下,建立了适用于任意电阻性负载的级联Blumlein型脉冲形成网络电压波过程理论模型,基于波过程模型进一步分析了影响脉冲形成网络过电压幅值的因素。研究表明开关不同步是产生过电压的主要因素,过电压峰值出现在开关闭合后的3倍形成网络电长度时刻。随着网络级联级数的增加,二极管阻抗与源阻抗匹配情况下最大过电压可达到-2倍充电电压,而二极管阻抗下降使得过电压幅值得以加强,阻抗过早崩溃可使过电压幅值接近充电电压的-3倍。

关 键 词:闪光X光机    光导开关    级联Blumlein型脉冲形成网络    过电压    同步
收稿时间:2013/10/9

Analysis on voltage wave process of stacked Blumlein PFNs driving flash X-ray diodes
Affiliation:1.Key Laboratory of Pulsed Power,Institute of Fluid Physics,CAEP,P.O.Box 919-108,Mianyang 621900,China
Abstract:Stacked Blumlein pulse forming networks (PFNs) with photoconductive semiconductor switches can be used to drive flash X-ray diodes. In order to increase allowable running voltage of the device, factors affecting overvoltage on ceramic capacitors for PFNs during discharge are investigated. A voltage wave model of the stacked Blumlein PFNs is established, which incorporates parameters such as switch turn-on delay time, conductive resistance, and arbitrary resistor load, and the results are in accordance with that of PSpice circuit program. Moreover, factors influencing overvoltage coefficient are discussed, which shows that switch synchronization is key to overvoltage, the decreasing of diode impedance enhances the overvoltage coefficient, and too early collapse of diode impedance boosts the overvoltage up to-3 times the charge voltage.
Keywords:flash X-ray generator  photoconductive semiconductor switches  stacked Blumlein pulse forming networks  overvoltage  synchronization
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号