首页 | 官方网站   微博 | 高级检索  
     

电磁轨道发射器的模型化研究方法北大核心CSCD
引用本文:林灵淑,袁伟群,赵莹,王志增,严萍.电磁轨道发射器的模型化研究方法北大核心CSCD[J].强激光与粒子束,2016,28(1):015007-71.
作者姓名:林灵淑  袁伟群  赵莹  王志增  严萍
作者单位:1.中国科学院大学, 北京 1 001 90;
基金项目:国家自然科学基金项目;国家自然科学基金青年基金项目
摘    要:为了更高效地对电磁轨道发射进行大量的实验研究,分析改进了使用中小口径发射器作为研究对象的模型化研究方法。考虑到材料属性等实验条件的可行性,对电磁轨道发射器进行模型化,分析其电磁场、温度场等物理场以及速度、带载能力等性能指标,提出较为可行的模型化研究方案,并利用Ansoft Maxwell等软件对瞬态情况下的发射器三维模型进行仿真验证。理论推导和仿真结果表明:电磁轨道发射器的模型化研究方法有很多种,在大口径原型发射器中采用电导率相对较低的材料,即可实现与现有的、采用电导率较高材料的中小口径发射器的物理场匹配,且保证速度和单位体积带载能力相同。

关 键 词:电磁发射  轨道发射  模型化方法  数值计算  多物理场
收稿时间:2015-09-04

Scaling method on electromagnetic railgun
Affiliation:1.University of Chinese Academy of Sciences,Beijing 100190,China;2.Institute of Electrical Engineering,Chinese Academy of Sciences,Beijing 100190,China;3.Key Laboratory of Power Electronics and Electric Drive,Chinese Academy of Sciences,Beijing 100190,China
Abstract:In order to conduct experimental study effectively, the scaling method used in a small or medium caliber railgun launcher was analyzed and improved. In consideration of the feasibility of the experimental conditions, studies on the electromagnetic field and loading capacity were conducted under the condition that the material properties were constant. In addition, related simulations were carried out to prove the scaling model. Results indicate that there are various scaling methods. In a large diameter rail launcher with relatively low conductivity, the physical fields can match the model launcher which has higher conductivity.
Keywords:
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号