| 大高宽比纳米硅立柱的感应耦合等离子体刻蚀工艺优化 |
| |
| 引用本文： | 李欣,刘建朋,陈烁,张思超,邓彪,肖体乔,孙艳,陈宜方.大高宽比纳米硅立柱的感应耦合等离子体刻蚀工艺优化[J].强激光与粒子束,2017,29(7):074102. |
| |
| 作者姓名： | 李欣 刘建朋 陈烁 张思超 邓彪 肖体乔 孙艳 陈宜方 |
| |
| 作者单位： | 1.复旦大学 信息科学与工程学院专用集成电路与系统国家重点实验室, 上海 200433; |
| |
| 摘 要： | 针对氢基硅倍半氧烷(hydrogen silsesquioxane,HSQ)作为深反应离子刻蚀(DRIE)掩膜形成大高宽比纳米硅立柱的工艺进行了系统研究。优化了刻蚀工艺中线圈功率、极板功率和气体流量参数,减小了横向刻蚀,使形貌垂直性得到了更好的控制,并实现了13.3 m高度和低侧壁粗糙度的垂直硅纳米柱阵列,其高宽比（高度/半高宽）达到了36。利用不同的刻蚀工艺条件得到了不同侧壁形貌以及不同尺寸、高度的硅纳米柱结构。
|
| 关 键 词： | HSQ 深反应离子刻蚀 硅纳米柱 高宽比 硬X射线 |
| 收稿时间： | 2017-01-20 |
Process optimization of inductively coupled plasma etching for large aspect ratio silicon nanopillars |
| |
| Affiliation: | 1.State Key Laboratory of ASIC and System,School of Information Science and Engineering,Fudan University,Shanghai 200433,China;2.Shanghai Institute of Applied Physics,Chinese Academy of Sciences,Shanghai 200433,China;3.Shanghai Institute of Technical Physics,Chinese Academy of Sciences,Shanghai 200433,China |
| |
| Abstract: | Deep Reactive Ion Etching (DRIE) process on Si to achieve nanopillar arrays with large aspect ratio by using hydrogen silsesquioxane (HSQ) as etching masks has been systematically studied. Parameters in etching process such as coil power, platen power and gas flow have been optimized. The lateral etching has been reduced and the verticality has been controlled better. Under the optimized condition, 13.3 m high Si nanopillars with good verticality, low roughness and the aspect ratio up to 36 (height/FWHM) were fabricated. And Si nanopillars with different sidewall profile, size and height were obtained using different etching conditions. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载全文 |
|
