Tunable Ba<sub>0.5</sub> Sr<sub>0.5</sub> TiO<sub>3</sub> film bulk acoustic resonators using SiO<sub>2</sub> /Mo Bragg reflectors |
| |
| Authors: | Yang Tian-Ying Jiang Shu-Wen Li Ru-Guan and Jiang Bin |
| |
| Affiliation: | State Key Laboratory of Electronic Thin Films and Integrated Devices,University of Electronic Science and Technology of China |
| |
| Abstract: | Tunable and switchable Ba 0.5 Sr 0.5 TiO 3 film bulk acoustic resonators(FBARs) based on SiO 2 /Mo Bragg reflectors are explored,which can withstand high temperature for the deposition of Ba x Sr 1 x TiO 3(BST) films at 800 C.The dc bias-dependent resonance may be attributed to the piezoelectricity of the BST film induced by an electrostrictive effect.The series resonant frequency is strongly dc bias-dependent and shifts downwards with dc bias increasing,while the parallel resonant frequency is only weakly dc bias-dependent and slightly shifts upwards at low dc bias(< 45 V) while downwards at higher dc bias.The calculated relative tunability of shifts at series resonance frequency is around 2.3% and the electromechanical coupling coefficient is up to approximately 8.09% at 60-V dc bias,which can be comparable to AlN FBARs.This suggests that a high-quality tunable BST FBAR device can be achieved through the use of molybdenum(Mo) as the high acoustic impedance layer in a Bragg reflector,which not only provides excellent acoustic isolation from the substrate,but also improves the crystallinity of BST films withstanding higher deposition temperature. |
| |
| Keywords: | Ba x Sr 1-x TiO 3 tunable film bulk acoustic wave resonator ferroelectric acoustic Bragg reflector |
| 本文献已被 维普 等数据库收录！ |
