| 基于多点可调支撑Ф300 mm平面重力变形校正研究 |
| |
| 引用本文： | 王云涛,陈磊,陈佳,张正宇,孔璐.基于多点可调支撑Ф300 mm平面重力变形校正研究[J].应用光学,2020,41(4):801-809. |
| |
| 作者姓名： | 王云涛 陈磊 陈佳 张正宇 孔璐 |
| |
| 作者单位： | 南京理工大学，电子工程与光电技术学院，江苏 南京 210094 |
| |
| 基金项目： | 国家自然科学基金（U1731115）；江苏省研究生科研与实践创新计划项目（KYCX19_0285） |
| |
| 摘 要： | 在高精度光学元件领域，特别是大口径的平面光学元件，随着对测试精度和口径要求的提高，重力变形成为其不可避免的问题。介绍了立式斐索型干涉仪的系统设计和多点可调支撑方法的变形理论，通过有限元分析（FEM），优化得到了合理的支撑结构。采用液面基准，在300 mm口径的立式斐索型干涉仪上进行了平面的重力变形校正。与三平面法检测结果比较，两者的残差峰谷（PV）值为10.20 nm，均方根（RMS）值为1.56 nm。
|
| 关 键 词： | 大口径光学平面 重力变形 绝对检验 有限元分析 |
| 收稿时间： | 2020-04-28 |
Distortion correction research by gravity for 300-mm-aperture flat based on multi-point adjustable support |
| |
| Affiliation: | School of Electronic and Optical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China |
| |
| Abstract: | In the field of high-precision optical elements, especially the planar optical elements with large aperture, the deformation by gravity becomes an inevitable problem with the improvement of requirements for higher measuring accuracy and larger aperture. The system design of vertical Fizeau interferometer and the deformation theory of multi-point adjustable support method were introduced.By finite element method (FEM) analysis, the reasonable support structure is optimized and derived. Calibration of deformation of flat by gravity was obtained on 300-mm-diameter vertical Fizeau interferometer with liquid surface datum. Comparing it with detection result by three-flat method, the residual between two methods can reach 10.20 nm for peak valley (PV), and 1.56 nm for root mean square (RMS). |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《应用光学》浏览原始摘要信息 |
|
点击此处可从《应用光学》下载全文 |
