首页 | 官方网站   微博 | 高级检索  
     

逆向成像法畸变测试技术研究
引用本文:郭羽,赵生禄,郑雪,张玫,马世帮,杨红,姜昌录,康登魁.逆向成像法畸变测试技术研究[J].应用光学,2013,34(2):304-307.
作者姓名:郭羽  赵生禄  郑雪  张玫  马世帮  杨红  姜昌录  康登魁
作者单位:1.西安应用光学研究所,陕西 西安 710065;
摘    要:在相对畸变的定义下,提出了逆向成像畸变测试方法。通过把目标靶尺放到被测系统的焦面位置,再将被测光学系统的入瞳位置放到精密转台的转轴位置,将被测光学系统从正向最大视场处向负向最大视场处旋转,测量14个视场点后,可得到各个视场的畸变值。该方法严格要求把被测光学系统的入瞳位置放置在精密转台的旋转轴上,否则无法测量出整个视场的畸变值。焦距测量精度达2 m,畸变测量精度达5.010-4。

关 键 词:畸变    入瞳    焦距    视场    精度
收稿时间:2012/11/20

Distortion measurement with inverse imaging method
GUO Yu,ZHAO Sheng-lu,ZHENG Xue,ZHANG Mei,MA Shi-bang,YANG-Hong,JIANG Chang-lu,KANG Deng-kui.Distortion measurement with inverse imaging method[J].Journal of Applied Optics,2013,34(2):304-307.
Authors:GUO Yu  ZHAO Sheng-lu  ZHENG Xue  ZHANG Mei  MA Shi-bang  YANG-Hong  JIANG Chang-lu  KANG Deng-kui
Affiliation:1.Xi-an Institute of Applied Optics,Xi-an 710065,China;2.Army Aviation Military Representative Office Stationed in Xi-an,Xi-an 710065,China
Abstract:According to the definition of relative distortion, a distortion measurement with inverse imaging method was proposed. We first placed the target on the focus surface of the unit-under-test (UUT), put the entrance pupil position of the UUT at the rotation axis position of the precise turntable, and rotated the UUT from the forward maximum field of view (FOV) to the negative maximum FOV, then measured 14 FOV points and finally obtained the distortion value of each FOV. Distortion value of the whole FOV could not be measured unless the entrance pupil position of the UUT was put at the rotation axis position of precise turntable strictly. The accuracy of focal length measurement is 2 μm, and the accuracy of relative distortion measurement is 0.5‰.
Keywords:distortion  entrance pupil  focal length  FOV  accuracy
点击此处可从《应用光学》浏览原始摘要信息
点击此处可从《应用光学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号