| 提高变焦电视光轴稳定性的装调工艺技术研究 |
| |
| 引用本文： | 马爱秋,杨朋利,白钊,张明,付晓庆,曾波,刘伟光.提高变焦电视光轴稳定性的装调工艺技术研究[J].应用光学,2016,37(4):602-606. |
| |
| 作者姓名： | 马爱秋 杨朋利 白钊 张明 付晓庆 曾波 刘伟光 |
| |
| 作者单位： | 1.西安应用光学研究所,陕西 西安 710065 |
| |
| 摘 要： | 针对连续变焦镜头光轴稳定性精度难以控制的问题，分析了影响光轴稳定性的主要因素，运用UG软件对连续变焦电视的曲线套筒和导杆进行了三维实体建模，应用有限元的方法对该模型进行了热力学分析；提出了有别于原有调校措施的方法和控制数据，采用胶粘与压圈相结合的双重固定方式来固定前组镜，提高了该型连续变焦镜头装调过程光轴稳定性，将产品的光轴稳定性从原来的12以内提升到5以内，为后续同类产品的研制奠定了装调基础和理论依据。通过试验验证了所提出方法的有效性。
|
| 关 键 词： | 变倍组 补偿组 连续变焦 光轴稳定性 |
Assembling and adjusting technique for#br#
improving optical axis stabilization of zoom TV |
| |
| Affiliation: | 1.Xi’an Institute of Applied Optics,Xi’an 710065,China |
| |
| Abstract: | Aiming at the problem that the stabilization precision of the zoom optical system is difficult to control, the critical factors influencing the stabilization of optical axis were analyzed.A 3D entity model of the curve sleeve and guide rod of the TV optical zoom system was simulated in UG, after that the thermodynamic analysis was done with the finite element method. A method of adjustment measure and the control data which were different from the original one were proposed,the fixing method combining the glue with the follower ring was utilized to fix the front group of mirror.Results show that the research can improve the stabilization precision of the zoom optical system during the assembling, it increases the stabilization of optical axis from 12 to 5; Thereby the results establish the assembling foundation and theoretical basis for the development of following similar products. Additional,the validity of this method was verified by several experiments. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《应用光学》浏览原始摘要信息 |
|
点击此处可从《应用光学》下载全文 |
|
