| 中国散裂中子源π模加速器的电磁设计和分析 |
| |
| 作者姓名： | Qu Peihua Liu Huachang Peng Jun Wang Yun Fan Mengxu Li Ahong |
| |
| 作者单位： | 1.中国科学院 高能物理研究所，北京 100049 |
| |
| 基金项目： | National Natural Science Foundation of China11105166Youth Innovation Promotion Association of CAS2015011 |
| |
| 摘 要： | 中国散裂中子源(CSNS)一期工程现处于调束运行阶段，未来二期工程考虑采用π模加速器将直线段能量从80 MeV升级到300 MeV，对该加速器进行了预研究。利用2D程序SUPERFISH设计出了π模加速器的单元尺寸，其中工作频率为324 MHz，β为0.4。通过3D程序CST优化了耦合系数、耦合孔的个数以及耦合孔的形状。耦合系数的设计值定为6.53%。利用尾部调谐环和7个固定调谐器将电场平整度调至2.18%，满足运行要求。
|
| 关 键 词： | PIMS 电磁设计和分析 优化耦合系数 电场平整度调谐 |
| 收稿时间： | 2017-09-25 |
Electromagnetic design and analysis of pi-mode structure for CSNS |
| |
| Qu Peihua,Liu Huachang,Peng Jun,Wang Yun,Fan Mengxu,Li Ahong.Electromagnetic design and analysis of pi-mode structure for CSNS[J].High Power Laser and Particle Beams,2018,30(5):055101-1-055101-5. |
| |
| Affiliation: | 1.Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China2.Dongguan Neutron Science Center, Dongguan 523803, China |
| |
| Abstract: | The phase one project of the China Spallation Neutron Source (CSNS) is in the stage of beam commissioning. In the future, the pi-mode structure (PIMS) will be used to upgrade the energy of linac from 80 MeV to 300 MeV. Some preliminarily study was done. The dimension of the PIMS was designed with 2D code SUPERFISH, where the operating frequency was 324 MHz and the β value was 0.4. Coupling coefficient, number of coupling slots and the shape of them were optimized by 3D code CST Microwave studio. The coupling coefficient was chosen to be 6.53%. Field flatness was tuned to 2.18% with slug tuners, which meet the operational requirements. |
| |
| Keywords: | |
|
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载全文 |
