| 回旋行波管电子枪阴极热分析 |
| |
| 引用本文： | 牛婧杨,王丽,罗勇,蒋伟.回旋行波管电子枪阴极热分析[J].强激光与粒子束,2013,25(2):446-450. |
| |
| 作者姓名： | 牛婧杨 王丽 罗勇 蒋伟 |
| |
| 作者单位： | 1.电子科技大学 物理电子学院, 成都 61 0054 |
| |
| 基金项目： | 预研基金项目(51323010203B) |
| |
| 摘 要： | 使用有限元分析软件ANSYS对回旋行波管电子枪阴极进行了热分析和形变分析，得到了阴极模型的温度分布和热形变。为了保持阴极发射带表面温度的均匀性，增大了发射带下端与导热介质的接触面积，同时减小了发射带上端处的加热线圈个数，发现温度差由原来的18 ℃减小到了0.9 ℃。在热分析的基础上进行了热形变分析，将形变量结果带入EGUN软件验证，发现电子注的速度比增大，横向、纵向速度零散以及引导中心半径也都有所增加。
|
| 关 键 词： | 电子枪 阴极 热分析 ANSYS 热形变 |
| 收稿时间： | 2012/5/17 |
Thermal analysis of electron gun cathode for gyrotron travelling wave tube |
| |
| Niu Jingyang,Wang Li,Luo Yong,Jiang Wei.Thermal analysis of electron gun cathode for gyrotron travelling wave tube[J].High Power Laser and Particle Beams,2013,25(2):446-450. |
| |
| Authors: | Niu Jingyang Wang Li Luo Yong Jiang Wei |
| |
| Affiliation: | 1.School of Physical Electronics,University of Electronic Science and Technology of China,Chengdu 610054,China |
| |
| Abstract: | The paper presents the thermal and deformation analysis of electron gun cathode for Gyro TWT using the finite element analysis software ANSYS, which obtains the temperature distribution and thermal deformation of the cathode model. In order to maintain the uniformity of surface temperature of the cathode emitter, the contact area of the thermal conductive medium with the emitter bottom is extended and the amount of the heater coil near the top of the emitter is reduced, the temperature difference decreases from 18 ℃ to 0.9 ℃. On the basis of the thermal analysis, thermal deformation analysis is demonstrated and the velocity ratio, longitudinal and transverse velocity spread, guide center radius all increase in EGUN code simulation. |
| |
| Keywords: | electron gun cathode thermal analysis ANSYS thermal deformation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载全文 |
|
