| 0.14 THz瓦量级折叠波导行波管设计 |
| |
| 引用本文： | 陈樟,王亚军.0.14 THz瓦量级折叠波导行波管设计[J].强激光与粒子束,2013,25(6):1483-1488. |
| |
| 作者姓名： | 陈樟 王亚军 |
| |
| 作者单位： | 1.中国工程物理研究院 电子工程研究所, 四川 绵阳 621 900; |
| |
| 摘 要： | 在本课题组此前采用显式方法设计0.14 THz宽带折叠波导慢波结构的基础上，设计了一种0.14 THz瓦量级输出折叠波导行波管。通过CST MWS软件分析结构尺寸对冷测特性的影响规律来确定一组慢波结构参数，然后对电子枪、永磁聚焦系统、输入输出结构、衰减结构及收集极系统进行设计，最后经过CST PS软件进行整管热测特性仿真模拟。此过程不断迭代，最终找到一组结构参数满足频率在0.14 THz、输入功率为20 mW时，折叠波导行波管输出功率大于6 W。为了验证设计的电子光学系统的正确性，加工装配了一根流通管，并进行了流通率测试，测得流通率大于80%。
|
| 关 键 词： | 折叠波导 行波管 慢波结构 太赫兹 |
| 收稿时间： | 2012-11-19; |
Design of 0.14 THz watt-level folded waveguide traveling wave tube |
| |
| Chen Zhang,Wang Yajun.Design of 0.14 THz watt-level folded waveguide traveling wave tube[J].High Power Laser and Particle Beams,2013,25(6):1483-1488. |
| |
| Authors: | Chen Zhang Wang Yajun |
| |
| Affiliation: | 1.Institute of Electronic Engineering,CAEP,P.O.Box 919-536,Mianyang 621900,China;2.Terahertz Research Center,CAEP,P.O.Box 919-536,Mianyang 621900,China |
| |
| Abstract: | Based on our previous work which introduced an explicit method to design the slow wave circuit of a 0.14 THz broadband folded waveguide traveling wave tube, a 0.14 THz watt-level folded waveguide traveling wave tube has been designed, with a set of slow wave structure parameters determined by analyzing the influence of structure dimensions on its cold characteristics using CST MWS. Over 6 W output power is attained with 3D PIC method by means of CST PS, at around 0.14 THz, as the input power is 20 mW. A transmission tube was fabricated in order to verify the designed electron-optical system. Measurement results show an over 80% electron transmission rate. |
| |
| Keywords: | traveling wave tubes slow wave structure terahertz |
|
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载全文 |
|
