|
|||||
|
|
| 基于径向剪切干涉仪的三维位移测量技术 | |
| 引用本文： | 王佳,刘荣明,王佳超,吴慎将. 基于径向剪切干涉仪的三维位移测量技术[J]. 物理学报, 2021, 0(7): 54-62 |
| 作者姓名： | 王佳 刘荣明 王佳超 吴慎将 |
| 作者单位： | 西安工业大学光电工程学院 |
| 基金项目： | 国家自然科学基金(批准号:61701385);装备预先研究领域基金(批准号:61406190121);预研重点实验室基金(批准号:6142602200407)资助的课题. |
| 摘 要： | 本文提出一种基于双圆光栅径向剪切干涉仪的三维位移测量方法,其测量原理是径向剪切干涉仪所形成的莫尔条纹不仅由二维平面内位移决定,轴向位移会在+1和–1级莫尔条纹之间产生一个特定的相移.首先,基于标量衍射理论对双圆光栅径向剪切干涉仪的+1和–1级莫尔条纹强度分布进行推导,建立了三维位移量与莫尔条纹强度分布的精确解析关系;其... |
| 关 键 词： | 三维位移测量 径向剪切干涉仪 莫尔条纹 圆光栅 |
Measurement of three-dimensional displacements by radial shearing interferometer |
|
| Wang Jia,Liu Rong-Ming,Wang Jia-Chao,Wu Shen-Jiang. Measurement of three-dimensional displacements by radial shearing interferometer[J]. Acta Physica Sinica, 2021, 0(7): 54-62 | |
| Authors: | Wang Jia Liu Rong-Ming Wang Jia-Chao Wu Shen-Jiang |
| Affiliation: | (School of Optoelectronic Engineering,Xi’an Technological University,Xi’an 710021,China) |
| Abstract: | Moiré patterns formed by overlapping two circular gratings of slightly different pitches have been extensively used for measuring the two-dimensional(2D)and three-dimensional(3D)displacements.However,in the existing applications,Moiré patterns are analyzed based on geometric superposition,by which the 3D displacements cannot be instantaneously or simultaneously measured with a high accuracy.In this paper,radial shearing interferometry with double circular gratings of slightly different pitches is presented to realize the simultaneous measurement of 3D displacements.The measurement is based on the principle that Moiré patterns produced by radial shearing interferometry are determined not only by the 2D in-plane displacements,but also by the out-of-plane displacement that brings about a phase shift between Moiré patterns of+1 and–1 diffraction orders.First,the production mechanism of Moiré patterns by radial shearing interferometry is studied based on the scalar diffraction theory and the intensity distribution of Moiré fringes of+1 and–1 orders is derived to establish the exact analytic relations between Moiré patterns and 3D displacements.Second,on the basis of spectrum characteristics of circular grating,a semicircular ring filter is proposed for spatial filtering to realize the simultaneous imaging of Moiré fringes of+1 and–1 orders.Then,the algorithm to quantitatively extract 3D displacements from Moiré patterns is proposed and demonstrated by numerical simulation.In the algorithm,Moiré patterns in the rectangular coordinate system are transformed into the polar coordinate system and skeletons are extracted to determine the feature points of the bright fringes.The in-plane displacements can be solved by feature points of+1 or–1 diffraction order,and the out-of-plane displacement can be computed by the feature points of+1 and–1 diffraction orders in the same bright fringe.Finally,experimental results prove that the maximum absolute error and mean error for in-plane displacements are 4.8×10–3 mm and 2.0×10–4 mm respectively,and 0.25 mm and 8.6×10–3 mm for out-of-plane displacement.In conclusion,by using the Moiré patterns of+1 and–1 diffraction orders imaged by radial shearing interferometer with double circular gratings of slightly different pitches,the 3D displacement can be simultaneously measured.The method has the advantages of simple device,high measurement accuracy,noncontact and instantaneous measurement,which provides an important guidance for practically measuring the 3D displacements. |
| Keywords: | 3 D displacements measurement radial shearing interferometer Moiréfringes circular gratings |
| 本文献已被 CNKI 维普 等数据库收录！ | |